What Is Accumulated Depreciation?

Accumulated depreciation is a method of accounting for the annual reduction of an asset's value up to a single point in its usable life. This type of depreciation can be calculated using one of six methods: the straight line, declining balance, double-declining balance, sum-of-the-years' digits, units of production, and half-year recognition.

When you purchase an asset for your business, it has a market valu🎶e. As that asset ages or is used, it loses some of that value. This is called depreciation—the opposite of appreciation, which is an increase in value.

Businesses can expense this value reduction over the item's lifetime. Some assets which accumulate depreciation are:

• Vehicles
• Furniture
• Computers
• Equipment

The figure for accumulated depreciation can be located on a company's balance sheet below the line for related capitalized assets.

Methods to Calculate Accumulated Depreciation

There are six accepted methods for calculating depreciation that are allowable under 澳洲幸运5开奖号码历史查询:gen𒁃erally accepted accounting principles (GAAP). A company may select from the following:

• Straight line
• Declining balance
• Double-declining balance
• Sum-of-the-years' digits
• Units of production
• Half-year recognition

Straight Line Method

The most common method is the 澳洲幸运5开奖号码历史查询:straight line method of accounting. A company deducts the asset’s salvage value from the purchase price to find a depreciable bas🍌e. Then, this base is accumulated evenly over the anticipated useful life of the asset. The straight line method formula is:

$\begin{aligned}&\text{AAD}=\text{(Asset Value}-\text{Salvage Value)}\div\text{ULY}\\&\textbf{where:}\\&\text{AAD}=\text{Annual Accumulated Depreciation}\\&\text{ULY}=\text{Useful Life in Years}\end{aligned}$​AAD=(Asset Value−Salvage Value)÷ULYwhere:AAD=Annual Accumulated DepreciationULY=Useful Life in Years​

Imagine that﷽ Company ABC buys a building for $250,000. The building is expec𝓡ted to be useful for 20 years, with a value of $10,000 at the end of the 20th year.

The depreciable base for the building is $250,0🐻00 - $10,000 = $240,000.🔯 Divided over 20 years, the company would recognize $12,000 in accumulated depreciation annually.

Declining Balance Method

With the 澳洲幸运5开奖号码历史查询:declining balance method, depreciation is recorded as a percentage of the asset's current book value. Because the same percentage is👍 used every year while the current book value decreases, the amo🧸unt of depreciation decreases each year. Even though the total accumulated depreciation will increase, the amount of accumulated depreciation per year will decrease.

$\begin{aligned}&\text{AAD}=\text{Current Book Value}\times \text{ DR}\\&\textbf{where:}\\&\text{AAD}=\text{Annual Accumulated Depreciation}\\&\text{DR}=\text{Depreciation Rate} \end{aligned}$​AAD=Current Book Value× DRwhere:AAD=Annual Accumulated DepreciationDR=Depreciation Rate​

Let's say that Company ABC buys a company vehicle for $10,000 with no 澳洲幸运5开奖号码历史查询:salvage value at the end of its life. The company decided it ♈would depreciate 20% of the book value each year. Here's how that calculation would look:

• Year 1 = ( $10,000 x 20% ) = $2,000
• Year 2 = [ ( $10,000 - $2,000 ) x 20% ) ] = $1,600
• Year 3 = [ ( $8,000 - $1,600 ) x 20% ) ] = $1,280
• Year 4 = [ ( $6,400 - $1,280 ) x 20% ) ] = $1,024
• Year 5 = [ ( $5,120 - $1,024 ) x 20% ) ] = $819.20
• Keeps going until salvage value is reached

Double-Declining Balance Method

Using the 澳洲幸运5开奖号码历史查询:double-declining balance (also called accelerated depreciation), a company calculates what its depreciation would be under the straight line method. Then, the company doubles the depreciation rate, keeps this rate the same across all years t🙈he asset is depreciated and accumulates depreciation until the salvage value is reached. The percentage can simply be calculated as 100% of th💎e value divided by the number of years of useful life multiplied by two.

$\begin{aligned}&\text{D-DBMR}=(100\%\div\text{ULY)}\times2\\&\text{D-DBM}=\text{Depreciable Amount}\times\text{D-DBMR}\\&\textbf{where:}\\&\text{D-DBMR}=\text{Double-Declining Balance Method Rate}\\&\text{ULY}=\text{Useful Life in Years}\\&\text{D-DBM}=\text{Double-Declining Balance Method}\end{aligned}$​D-DBMR=(100%÷ULY)×2D-DBM=Depreciable Amount×D-DBMRwhere:D-DBMR=Double-Declining&nb💟sp;Balance Method RateULY=Useful Life in YearsD-DBM=Double-Declining Balance Method​

So, consider that Company ABC's building was purchased for $250,000 with a $10,000𒈔 salvage value. Under the straight-line method, the company recognized 5% (100% depreciation ÷ 20 years); therefore, it would use 10% as the depreciation base for the double-declining bal🌄ance method.

The company would recognize $24,000 (💦$240,000 depreciable base x 10%) in Year 1 and would recognize:

• Year 2 = [ ( $240,000 - $24,000 ) x 10% ] = $21,600
• Year 3 = [ ( $218,400 - $21,600 ) x 10% ] = $19,680
• Year 4 = [ ( $196,800 - $19,680 ) x 10% ] = $17,712
• Year 5 = [ ( $177,120 - $17,172 ) x 10% ] = $15,940.80
• Year 6 = [ ( $161,179.20 - $15,940.80 ) x 10% ] = $14,523.84
• Keeps going until the value remaining is $10,000

Sum-of-the-Years' Digits Method

With the 澳洲幸运5开奖号码历史查询:sum-of-the-years' digits method, a company strives to record more depreciation earlier in the life of an asset and less in the later years. This is done b💝y adding up the digits of the useful years and then depreciating based on that number of years.

$\begin{aligned}&\text{AAD}=\text{Depreciable Base}\times\text{(IYN)}\div\text{SYD}\\&\textbf{where:}\\&\text{AAD}=\text{Annual Accumulated Depreciation}\\&\text{IYN}=\text{Inverse Year Number}\\&\text{SYD}=\text{Sum of Year Digits}\end{aligned}$​AAD=Depreciable Base×(IYN)÷SYDwhere:AAD=Annual Accumulated DepreciationIYN=Inverse Year NumberSYD=Sum of Year Digits​

Company ABC purchased a piece of equipment with a useful life of 5 years. The a❀sset has a depreciable base of $15,000. Since the asset has a useful life of 5 years, the s🦂um of year digits is 15 (5+4+3+2+1).

The depreciation rate is then the quotient of the inverse year number (Year 1 = 5, Year 2 = 4, Year 3 = 3, and so on) divided 🧸by 15:

• Year 1 = [ $15,000 x ( 5 ÷ 15 ) ] = $5,000
• Year 2 = [ $15,000 x ( 4 ÷ 15 ) ] = $4,000
• Year 3 = [ $15,000 x ( 3 ÷ 15 ) ] = $3,000
• Year 4 = [ $15,000 x ( 2 ÷ 15 ) ] = $2,000
• Year 5 = [ $15,000 x ( 2 ÷ 15 ) ] = $1,000
• Keeps going until salvage value is reached

Units of Production Method

Using the 澳洲幸运5开奖号码历史查询:units of production method, a company estimates the total useful output🍌 of an asset. Then, the company evaluates how many of those units were consumed each year to recognize accumulated depreciation variably based on use. The formula for the units of production method is:

$\begin{aligned}&\text{AAD}=\text{(NUC}\div\text{TUTBC)}\times\text{Depreciable Base}\\&\textbf{where:}\\&\text{AAD}=\text{Annual Accumulated Depreciation}\\&\text{NUC}=\text{Number of Units Consumed}\\&\text{TUTBC}=\text{Total Units To Be Consumed}\end{aligned}$​AAD=(NUC÷TUTBC)×Depreciable Basewhere:AAD=Annual Accumulated DepreciationNUC=Number of Units ConsumedTUTBC=Total Units To Be Consumed​

For example, Company ABC buys another company vehicle and plans on driving the car 80,000 miles. In the first year, the company drove the vehicle 8,000 miles. Therefo🔯re, it would recognize 10% or (8,000 ÷ 80,000) of the depreciable base.

In the second year, if the company drives 20,000 miles, it would recognize 25% (or 20,000 ÷ 80,000) of the dep♊reciable base as an expense in the second year, with accumulated depreciation now equal to $28,000 ($8,000 in the first year + $20,000 in the second year).

Fast Fact

Accumulated depreciation depends on salvage val꧅ue. Salvage value is the amount of money a company༒ may expect to receive in exchange for selling an asset at the end of its useful life.

Half-Year Recognition

A common strategy for partially depreciating an asset is to recognize a half year of depreciation in the year an asset i🌌s acquired and a half year🅠 in the last year of an asset's useful life. This strategy is employed to fairly allocate depreciation expense and accumulated depreciation in years when an asset may only be used for part of a year.

For example, Company ABC buys a company vehicle in Year 1 with a five-year useful life. Regardless of the month, the company will recognize six months' worth of depreciation in Year 1. The company will also recognize a full year of depreciation in Years 2 to 5.

Then, the company will recognize the final half-year of depreciation in Year 6. Although the asset only had a useful life of five years, it is argued that the asset wasn't used for the entirety of Year 1 or Year 6.

Accounting Adjustments and Changes in Estimates

The depreciation process is heavily rooted in estimates. So, it’s common for companies to need to revise their guess on the useful life of an asset or theꦅ salvage value at the end of it.

This change is reflected as a 澳洲幸运5开奖号码历史查询:change in accounting estimate, not a change in accounting principle. For example, say a company was depreciating a $10,000 asset over its five-year useful life with no salvage value. Using the straight-line𝔍 method, an accumulated depreciation of $2,000 is recognized.🐷

After two years, the company realizes the remaining useful life is not three more years but six more years. Under GAAP, the company does not ꧟need to retroactively adjust financial statements for changes in estimates. Instead, the company will change the amou⛦nt of accumulated depreciation recognized each year.

In this example, since the asset now has a $6,000 net book value ($10,000 purchase price less $🅘4,000 of accumulated depreciation booked in the first two years), the company will now recognize $1,000 of acc💯umulated depreciation for the next six years.

Accumu🙈lated Depreciation vs. Accelerated Depreciation

Though similar sounding in name, accumulated depreciation and 澳洲幸运5开奖号码历史查询:accelerated depreciation are very different accounting concepts, where:

• Accumulated depreciation refers to the life-to-date depreciation that has been recognized that reduces the book value of an asset.
• Accelerated depreciation refers to a method of depreciation whereby a higher amount of depreciation is recognized earlier in an asset’s life.

Since accelerated depreciation is an accounting method used to recognize depreciation, the res🎃ult of accelerated depreciation is to book accumulated depreciation. Under this method, the amount of accumulated depreciation accumulates faster during the early years of an asset’s life and accumulates more slowly later.

The philosophy behind accelerated depreciation is that newer assets, such as a new company vehicle, are often used more than older assets because they are in better condition and more efficient.


Important

Accumulated d﷽epreciation is a contra account. It is generally presented as a line item on a balance sheet, subtracted from gꦫross fixed assets.

Accu♔mulated Depreciation vs. Dep꧙reciation Expense

When an asset is depreciated, two accounts are immediately impacted: accumulated depreciation and depreciation expense. The journal entry to record depreciation results in a debit to depreciation expense and a 澳洲幸运5开奖号码历史查询:credit to accumulated depreciation. The dollar amount fo🀅r each line is equal to the other.

There are two main d😼ifferences between accumulated depreciation and depreciation expense:

• Depreciation expense is reported on the income statement, while accumulated depreciation is reported on the balance sheet. 
• Depreciation expense is recalculated every year, while accumulated depreciation is always a life-to-date running total.

The 澳洲幸运5开奖号码历史查询:income statement does not carry from year to year. Activity is swept to retained earnings, and a company resets its income statement every year. That's why depreciation expense gets recalculated. Meanwhile, the 澳洲幸运5开奖号码历史查询:balance sheet shows the aforementioned running total.


Is Accumulated Depreciation an Asset?

Accumulated depreciation is a contra asset account that 澳洲幸运5开奖号码历史查询:reduces the book value of an asset. Accumulatedไ depreciation has a natural credit balance (as opposed to assets with a natural debit balance). However, accumulated depreciation is reported within💧 the asset section of a balance sheet.

Is Accumulated Depreciation a Current Liability?

Accumulated depreciation is not a liability. A liability is a future financial obligation (i.e., debt) that the company 🎉must pay🐭.

How Do You Calculate Accumulated Depreciation?

Accumulated depreciation is calculated using the straight line, declining balance, the double-declining balance, the units of production, sum-of-the-years' digits, or the half-year recognition method.

The Bottom Line

Many companies rely on capital 🐷assets suc༒h as buildings, vehicles, equipment, and machinery as part of their operations. In accordance with accounting rules, companies must depreciate these assets over their useful lives.

As a result, companies must recogni⛦ze accumulated depreciation, the sum of depreciation expense recognized over the lif🅺e of an asset. Accumulated depreciation is reported on the balance sheet as a contra asset that reduces the net book value of the capital asset section.